Monday, February 20, 2012

Do I need a VHF or CB radio?

In order to talk to an air plane from the ground you would need a VHF radio rather than an CB? And of you would have to have one of each one on the plane and another on the ground.Do I need a VHF or CB radio?
OK, if you are talking to someone from the ground to an airplane privately, you can CB, VHF, UHF, HF, the new family band radios, or two cups and a real long piece of string.



Yes, you would need one radio on the airplane and one on the ground.



VHF is used to communicate to ATC. I don't know what you are trying to do, so to answer this question we'd need more info.
Yes we use VHF radios on aircraft. Not Citizens Band (CB)

and yes for a pilot to communicate with a ground station there must be a VHF radio on board the aircraft as well as one in the ground station, %26amp; in order to communicate each must be tuned to the same frequency.Do I need a VHF or CB radio?
you need a VHF AM airband radio, be carefull though cos there are only certain frequencies you can speak on. you can buy them from companies such as icom. as long as theres a standard VHf on the airplane you can just tune into that frequency and chat away
The person on the ground and the person in the air both need to have a transmitter/receiver that operates on the same frequency. You have a choice of solutions; two are listed below:

- VHF aviation band radios are already installed in all aircraft (except certain ultralights or sport aircraft). You can buy a hand held radio (www.sportys.com or www.icom.com) for the person on the ground. Handhelds have less power, but you likely want to talk to someone reasonably close anyway. You will want to be particularly careful about what frequency you use. You will want to stay off local ATC, weather, unicom, and flightwatch frequencies (to name a few), and most of all, STAY OFF "GUARD" 121.5 MHz, but your pilot friend and you can select a frequency. I lent a spare handheld to a friend whom I would visit often. Before taking off, I'd call by phone to give a rough ETA and would have her monitor the local unicom frequency. When she heard me call in at 5 miles out, she'd jump in the car and pick me up at the airport :-)



- Cell phones - these are great since just about everybody has one. You are supposed to turn them off in powered aircraft (may interfere with navigation devices) but it is noteworthy that you can buy aviation headset adaptors to plug into cell phones. We used them all the time in gliders (where you didn't have to contend with engine noise). Of course, the ground based antennas for the individual cells in the network were designed for ground-based users so the aerial coverage can be a bit spotty.



I'm told that the networks get a bit miffed if you are using a cell phone in a plane as you switch from cell to cell quickly and it provides an additional switching burden. That wasn't much of a problem in a glider (60-80mph) which is car highway speed, but it is pretty obvious in a powered aircraft at 150 knots or faster.Do I need a VHF or CB radio?
I would like to say there are three methods of communication possible.



HF communication



It provides wide range communication its is operated within the range of 3MHz-30MHz. Pilot uses this mainly for getting recorded meteorology readings of designation airports. Rarely communicates.



VHF communication



It provides short range communication. VHF spectrum falls within the range of 30Mhz-300MHz. This is method is used for communicating to ATC for landing, parking , taxing and take-off. The operational range falls between 118.0Mhz to 132.0Mhz for commercial aircrafts, which are Amplitude Modulated (AM wave). Emergency frequency is 121.5Mhz also known as International Air Distress (IAD) and for military aircraft the emergency frequency also known as Military Air Distress (MAD) is 243.0MHz.



Cockpit-Ground Communication



This is a headset %26amp; mic jack. located at the ground crew contol panel which is located in a place nearby the front wheel. When the audio control panel (ACP) in cockpit is enabled to ground, cockpit and ground crew can communicate through this while towing, engine run up, any testing needs supervision from outside.



Public are not allowed to operate on the frequency spectrum specified to aviation communications.

What is a good cb radio base antenna?

Hello

I am getting a cb radio for my house and I don't have too much experience with this stuff so I want a simple easy to set up (and not too big) Cb base antenna. I would rather not get a big huge one thats a pain to ajust. I would rather get a easy to use antenna that I can take down easily. What would you recomend?What is a good cb radio base antenna?
Go check it at any electronic shop.


you can get a solarcon ant. for about 70.00 bucks a 20 ' section of chain link fence top rail 20.00 bucks and any cb radio . try ebay for a base station with side bands. its alot of ,fun. lots of p,,,,,eople out here still talk. good luck.What is a good cb radio base antenna?
strange question, i was told that with the onset of mobile phones cb radios were out of fashion, go to a place like radio shack they are up with that thing
Don't get a moonraker if you want to take it down easy. Instead get just a plain old Ground plane omni directional antenna.What is a good cb radio base antenna?
moon raker with a rotor or cheaper an omni directional antenna

Is there any sites that have live streaming CB radio?

Is there any sites out there that broadcast live streaming CB radio chit chat? I've found nothing and the one i did find didnt work.Is there any sites that have live streaming CB radio?
http://www.listenlive.eu/uk.html



http://www.dxzone.com/catalog/Internet_a鈥?/a>Is there any sites that have live streaming CB radio?
why da *** would they need that?
  • pro comp
  • pontoon boats
  • I need to know how to make a PA system work on my cb radio?

    I have a cb radio with the PA function i just need to know what type of input to use for the radio to the speaker. Will a powerhorn work for the PA systemI need to know how to make a PA system work on my cb radio?
    Radio Shack sells an 8-ohm all-weather speaker that you can mount under the hood or in the grill. Just run the two wires connected to the speaker through the firewall and in to where the CB is mounted, and plug it in to the receptacle marked PA. You may have to purchase the male connector for the end of the wires, you can check when you buy the speaker. The other receptacle is usually for internal speaker. Be careful running the wires so they don't interfere with anything in the engine compartment, and don't get in trouble with local law enforcement. Have fun, good luck with it.

    Is there anything you can do if a cb radio signal is coming through on the tv?

    Our super annoying next door neighbor has a cb radio in his house. It used to not be so bad, but recently it is so loud that we cant watch tv when he's talking. And now it completely freezes the screen so you cant even watch if you want to. My mom said there's nothing that can be done, but there has to be something. Please helpIs there anything you can do if a cb radio signal is coming through on the tv?
    It sounds like your neighbor has intalled a power amplifier on his CB. These are illegal because they tend to cause all kinds of interference. I don't suppose talking to him about it would do any good. A call to the FCC should get him a letter about this. You might have to be persistant in calling the FCC but they should at least send a letter. If he pays any attention to the letter is debatable. It's worth a try. As the other answer suggests, a filter on your cable may help the situation.Is there anything you can do if a cb radio signal is coming through on the tv?
    This could be front-end overload due to illegal amplification of your neighbor's radio signal. Try putting a high-pass filter where the signal comes in. These are readily available at electronics stores.

    Do you have to tune antennas for a cb radio if you disconnect them from the mounts?

    I just got a cb radio and antenna mounts, it says to tune the antennas for the best performance, but i was wondering if i take the antennas off the mounts do i have to retune themDo you have to tune antennas for a cb radio if you disconnect them from the mounts?
    Find a shop that has a SWR.They can tune it for best range.Placement of antennae has a lot to do with range so ask them if your not sure.Once it's tuned,you won't need to do anything unless you replace mast.
    um how would u tune them??? u just hook them up....tuning means point them in the right direction.....which means moving ur truck/car to a better spot if u aren't getting good signal...Do you have to tune antennas for a cb radio if you disconnect them from the mounts?
    you don,t have to retune it as long as you don,t move the stinger. that,s the antenna. once you tune the antenna to the radio you can take it off and put it back on and the swr won,t change. i had a cb since 1977. you can tell by my name on here what my handle is.
    Once the antenna has been tuned you will not have to do it every time. Fine a good CB radio shop they will do this for you at a small charge. If you can not find a CB shop check your local Ham radio operator they can point you in the right direction.Do you have to tune antennas for a cb radio if you disconnect them from the mounts?
    Generally, tuning means to adjust the length of the antenna so it is the right length for the frequencies where you will be operating. Removing the antenna from the mount or the mount from the vehicle shouldn't be a problem. If the antenna rod becomes loose from the base or center coils (not a problem with 102" whips) you should retune it again with your SWR meter.



    Hint: Tune the antenna to channel 17. It should provide a better SWR throughout the band rather than turning it for the exact center of the band which is ch 19.

    How do I suppress noise in my Harley Davidson motorcycle cb radio?

    I have a 2000 Harley Davidson Ultra Classic with built in CB radio. It's very quiet with the engine off. When I start the motor I get a wining noise. How can I suppress some of that noise?How do I suppress noise in my Harley Davidson motorcycle cb radio?
    If this just recently started you might have a loose connection. Also there is a noise filter in the wire that brings power to the radio. Perhaps it has gone bad and needs to be replaced.
    Whining is noise coming in from alternator on power line.

    1: check all connections, including antenna.

    2: install an RF choke or filter in power line.

    DO NOT add anything between your radio and antenna.



    Clicking noise that increases with acceleration is from ignition.

    Check all plug and coil wires for clean, tight connections.

    Use resistor type spark plugs.How do I suppress noise in my Harley Davidson motorcycle cb radio?
    check grounds - its picking up the motor noise
    turn the squelch knob to the right until it stops.How do I suppress noise in my Harley Davidson motorcycle cb radio?
    You can buy a filter that goes between the CB and the coax to filter out ignition and alt. noise. Try the Harley dealer or Radio shack. good luck
    You can put an RF-gain filter on the power line. You may need resistor spark plugs to stop the hiss sound.
    Change the plugs find a resistor type plugs
    Remove the unit from the fairing and either give it to somebody who rides a Honda Oldwing or toss it in the nearest trashcan. What the hell do you need a CB radio on a Harley for.
    buy a real bike...lol